Pebble Gravity-Fed Water Bowl
This pebble-style gravity-fed water dispenser replenishes a shallow drinking basin as its water level drops. The removable upper reservoir stores water without pumps, wires, batteries, electricity or moving mechanical parts.
Details, dimensions & care
This pebble-style gravity-fed water dispenser replenishes a shallow drinking basin as its water level drops. The removable upper reservoir stores water without pumps, wires, batteries, electricity or moving mechanical parts.
Size & capacity
Approximate dimensions are length × width × height. Capacities are approximate water volumes.
| Size | Capacity | Inches | Centimetres |
|---|---|---|---|
| Small | 140 mL | 4.02 × 3.07 × 2.95 | 10.2 × 7.8 × 7.5 |
| Medium | 250 mL | 5.24 × 4.02 × 3.94 | 13.3 × 10.2 × 10 |
| Large | 470 mL | 6.46 × 4.96 × 4.53 | 16.4 × 12.6 × 11.5 |
| XL | 700 mL | 8.07 × 6.18 × 5.91 | 20.5 × 15.7 × 15 |
Check your enclosure dimensions before choosing a size.
What’s included
- 1 pebble-shaped water reservoir
- 1 matching drinking basin
Choose the available colour and size. Both parts work together as one gravity-fed dispenser.
Suitable animals
For leopard geckos and other terrestrial geckos, bearded dragons, skinks, small lizards, snakes and other reptiles that use floor-level drinking dishes. Match the size to your animal, drinking habits and enclosure space. This is for drinking water, not swimming or full-body soaking.
How to use
- Remove the upper reservoir and fill it with fresh, clean water.
- Position the reservoir securely in the matching base on a level surface.
- Allow the basin to fill to its operating level.
- Check the level daily, replenish as needed and clean regularly.
Automatic refilling does not replace regular water changes or enclosure maintenance.
Cleaning & care
- Remove the reservoir and clean both parts regularly.
- Hand-wash with lukewarm water and reptile-safe cleaner or mild soap; rinse thoroughly.
- Avoid boiling water, dishwashers and abrasive tools.
- Keep away from heating elements and excessive heat.
- Inspect for damage and wear; discontinue use if damaged.
Printed finish
Fine layer lines and small texture variations are normal with 3D printing. Colours and gradient patterns may vary between prints.