Heavy-duty modular snake climbing links for large boas and pythons

Heavy Duty Mega Snake Climbing Rings for Boas & Large Pythons | 6.5in Modular Reptile Enrichment Links | Terrarium Climbing Bridge

3 Links 2 Hooks / Black
$66.00 CAD
Skip to product information
Heavy-duty modular snake climbing links for large boas and pythons

Mega Snake Climbing Rings

$66.00 CAD

Mega Hex Links create a modular climbing route for larger snakes and enclosures. Each reinforced link has an approximately 6.5 in / 16.5 cm internal opening, a broad rounded body and a matte FDM surface for gripping and wrapping.

DesignBlack

You may also like

Details, dimensions & care

Mega Hex Links create a modular climbing route for larger snakes and enclosures. Each reinforced link has an approximately 6.5 in / 16.5 cm internal opening, a broad rounded body and a matte FDM surface for gripping and wrapping.

Modular construction

  • Open-gate links can be added, removed, rotated and repositioned.
  • Build a suspended bridge, hanging chain, curved route or enclosure-spanning system.
  • Thicker, heavier construction than the standard Hex Links.
  • Rounded, softened edges and a wide printed body provide climbing and resting surfaces.

What’s included

Each selected set includes Mega Hex Links, 2 heavy-duty anchor hooks / mounting plates, and mounting hardware according to the selected option.

  • 3 Links + 2 Hooks
  • 5 Links + 2 Hooks
  • 7 Links + 2 Hooks
  • 9 Links + 2 Hooks
  • 11 Links + 2 Hooks

Sizing & fit

Internal opening per link: approximately 6.5 in / 16.5 cm. Installed length varies with overlap and hanging angles. Use the Mega Hex Link Size Guide in the listing photos for approximate coverage and measure the enclosure before ordering.

Intended for boa constrictors, ball pythons, larger pythons, larger colubrids and medium-to-large climbing snakes. Suitability depends on the individual animal’s size, weight, behaviour, enclosure and mounting method.

Load-test limitation

A single Mega Link was tested with more than 15 lb / 6.8 kg applied. This is a component test, not an animal-weight rating or an installed-system guarantee.

Installed strength depends on mounting method, enclosure material, anchor placement, configuration, temperature and animal movement.

Mounting & enclosure compatibility

  • Glass/acrylic: use mounting hardware intended for clean, smooth, non-textured surfaces.
  • PVC/wood: screw-mounted anchors are strongly recommended for a more permanent installation.
  • Flexible, textured or uneven PVC may not hold suction reliably.
  • Verify both anchors are securely installed before animal use.

Colours

Choose from the listing colours. Colours may repeat when a multicolour set contains more links than selected colours. Leave a requested colour order in your notes; it will be followed where possible.

Canyon uses naturally transitioning multicolour filament, so exact placement and sequence vary from the photographs.

Finish & cleaning

Components are individually FDM printed; small layer lines and cosmetic variations are normal. Every component is inspected. Wipe with an appropriate reptile-safe cleaner and allow to dry fully before returning to the enclosure.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
E
Emily B

These are so perfect for my ball python! The quality is amazing, the edges are so smooth so there’s no chance of him getting hurt. He’s going to love climbing through them.