Skip to product information
Sakura reptile bug feeder box with removable calcium drawer

Sakura Reptile Bug Feeder Box

$62.99 CAD

This freestanding Sakura reptile insect feeder keeps crawling feeders visible against a textured removable backplate. A pull-out calcium-dusting drawer and optional pet-name lettering included in the displayed price let you tailor the feeding station to your setup.

You may also like

Details, dimensions & care

This freestanding Sakura reptile insect feeder keeps crawling feeders visible against a textured removable backplate. A pull-out calcium-dusting drawer and optional pet-name lettering included in the displayed price let you tailor the feeding station to your setup.

Freestanding placement

Place upright on a flat, stable, level enclosure-floor surface where your animal can reach the feeding area. Confirm that it cannot tip or shift. This feeder is not wall-mounted and includes no suction cups or enclosure-mounting hardware.

Removable magnetic backplate

  • Four integrated N52 magnets connect the backplate to the feeder body only; they do not attach the feeder to the enclosure.
  • Remove the backplate for cleaning and access to the inside of the box.
  • Reattach only after all components and magnetic connection areas are completely dry.

Calcium drawer & feeding

When required by your animal’s supplementation schedule, add a small amount of appropriate reptile calcium powder to the lower drawer. Crawling insects can contact it before climbing the backplate. Reinsert the drawer fully before feeding.

Calcium dusting is not gut-loading. Gut-loading means feeding nutritious food to insects before offering them to your reptile. Follow a calcium and vitamin schedule appropriate for your animal’s species, age and health.

Use appropriately sized Dubia roaches, mealworms, superworms or similarly sized crawling feeders. This is not an escape-proof container; insects can leave the feeding area, and crickets may climb or jump out more quickly. Start with a small, manageable number and supervise initial use. Remove uneaten insects, unused calcium and debris after feeding; do not leave excessive quantities unattended.

Optional name personalization included

Optional pet-name personalization is included in the displayed price, with no extra name fee. The price is the same whether or not a name is requested. If you would like a name, choose a font and provide the name exactly as it should appear, including spelling and capitalization. The name is raised 3D-printed lettering, not a sticker or vinyl label.

Fonts: Anton, Roboto, Black Han, Barricada, Varygraphie, Mail Ray and Calaya. Refer to the font comparison image.

If no name is requested, the feeder is made without a pet name; the displayed price is unchanged.

Colour customization

Choose from the colour-chart image and specify feeder, backplate and accent colours in the customization field. For example: Pink body, white drawer and Sakura backplate. Contact us before ordering a combination not shown.

What’s included

  • 1 freestanding bug-feeder body
  • 1 removable Sakura-pattern climbing backplate
  • Integrated four-magnet N52 backplate connection
  • 1 pull-out calcium-dusting drawer
  • Optional raised pet-name lettering, included in the displayed price when requested

Feeder insects, calcium powder, animals and enclosure decorations are not included.

Approximate dimensions

Overall height Overall width Usable internal depth
6.5 in / 16 cm 4.7 in / 12 cm 2.3 in / 6 cm

Internal depth is the feeding-space measurement, not the total exterior depth. Check your available enclosure space before ordering.

Cleaning & care

  • Remove the drawer and magnetic backplate before cleaning.
  • Empty calcium and insect debris; wipe or hand-wash with lukewarm water and reptile-appropriate cleaner.
  • Allow every component and connection area to dry completely before reassembly.
  • Do not use a dishwasher or boiling water, or leave magnetic components submerged.
  • Do not return wet components to the enclosure.
  • Inspect the drawer and backplate connection regularly; discontinue use if a magnet is loose, exposed or damaged.
  • Avoid direct contact with heat sources, including heat lamps and ceramic heat emitters.

Printed finish

Fine layer lines and minor surface variations are normal characteristics of 3D printing. Each item is inspected before dispatch.

  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
Michele Adriance

I highly recommend this seller. Excellent quality item.

M
Michele Silva

I love the items we ordered and shipping to the US was fast and effect less

C
Christine Salkeld

: } ......... cute little item